Dynaloc 9508

by dynatech — last modified 2007-04-25 11:31

Glass Bottle Labeling Adhesive

Description

DynaLoc 9508 is a general-purpose bottle labeling adhesive intended for adhering paper labels to glass bottles. This high quality adhesive exhibits good water resistance depending on the application and is very clean machining with low odor. This adhesive will adhere to lightly coated glass bottles

FDA Status

Complies with 21CFR175.105

Applications

Glass bottle labeling

Typical Properties

Total Solids	43.0 ± 1.5% (1)
Viscosity	45,000 - 60,000 cps (2)
pH	9.5 ± 0.5
Weight per gallon @ 23°C	9.4 ± 1.0 lbs.

Viscosity variations are available for machine specific requirements
Application method: Industry standard rotary labelers, ie., Krones


Storage Life	3 Months at Room Temperature

Testing Conditions

(1) Forced air oven 2 hours at 105°C

(2) Brookfield RVT, spindle #7 @ 20 rpm at 25°C


	12/06


This product information is presented in good faith and is to the best of our knowledge, accurate. It is intended to be used as a guide and is not to be construed as a specification for products described herein. Dyna-Tech does not guarantee satisfactory results in any application from reliance upon this information and assumes no liability for any loss or damage arising out of its use. Dyna-Tech recommends that the user of our products thoroughly test them under end use conditions to assure that they meet the requirements of intended applications.